Nieuw Nodigmarket24 Controlled jacking horizontaal gestuurd boren
Geïnteresseerd in de advertentie?
1/21
€ 28.000
Merk:
Nodigmarket24
Model:
Controlled jacking
Jaar:
2020
Standplaats:
Polen Zabrze
Datum van invoering:
meer dan 1 maand
Machineryline ID:
WM18355
Huur is mogelijk:
Motor
Merk:
Honda GX 390
Brandstof:
benzine
Conditie
Conditie:
nieuw
Origineel gelakt:
Inspectie op afstand
Vraag een onafhankelijke technische keuring aan
Belangrijk
Deze aanbieding is enkel een richtlijn. Vraag de verkoper voor meer informatie.
Aankooptips
Contactgegevens van de verkoper
"NODIGMARKET24"
In voorraad:
15 advertenties
Sinds 5 jaar bij Machineryline
5.0
25 beoordelingen
De telefoonnummers van de verkoper zijn gecontroleerd
The machines are produced with various hydraulic parameters. The example machine in the pictures has a tensile force of 200kN (20t) and allows pulling PE pipes up to 200mm.
The maximum length of the jacking is 60m. It also enables cracking on small asbestos, cast iron and stoneware pipes.
Execution of the controlled squeeze takes place at the execution of a small excavation, rough setting of the machine, arming the warhead with a radio probe and pilot drilling. Then, mount the expanding head depending on the diameter of the installed pipe and pull it into the ground. The whole process is done dry. Drilling polymers are used to retract the pipe over a longer distance. giving a significant slip and reducing friction when pulling.
If you have questions or interest, please contact us via the form or by phone.
Eng. Damian Sobczak
Specialist in the construction of culverts and mechatronics
Maszyny są produkowane z różnymi parametrami hydraulicznymi. Przykładowa maszyna na zdjęciach ma siłę uciągu 200kN (20t) i umożliwia wciąganie rur PE do 200mm
Maksymalna długość wykonania przecisku to 60m. Umożliwia również wykonanie krakingu na niewielkich rurach azbestowych, żeliwnych, kamionkowych..
Wykonanie przecisku sterowanego, odbywa się na wykonaniu niewielkiego wykopu, zgrubnym ustawieniu maszyny, uzbrojeniu głowicy w sondę radiową i wykonanie przewiertu pilotażowego. Następnie zamontowaniu głowicy poszerzającej w zależności od średnicy instalowanej rury oraz wciągnięcie jej w grunt. Cały proces odbywa się na sucho. Do wciąganie rury na dłuższym odcinku stosowane są polimery wiertnicze. dające znaczny poślizg i zmniejszenie tarcia podczas wciągania.
W razie pytań lub zainteresowania proszę kontaktować się poprzez formularz lub telefonicznie.
inż. Damian Sobczak
Specjalista d/s budowy przepustów i mechatroniki