Nieuw Turchi 260F / In stock heimachine
Geïnteresseerd in de advertentie?
1/22
€ 76.000
Merk:
Turchi
Model:
260F / In stock
Type:
heimachine
Jaar:
2024
Netto gewicht:
4.800 kg
Standplaats:
Duitsland Leipzig6986 km van u
Duitsland Leipzig6986 km van u
Datum van invoering:
29 nov 2024
Voorraad ID-nummer verkoper:
+380 67 005 0 228
Motor
Merk:
Yanmar 4TNV88
Vermogen:
35 kW (47.62 PK)
Volume:
2.190 cm³
Aantal cilinders:
4
Conditie
Conditie:
nieuw
Garantie::
1 jaar
Inspectie op afstand
Voertuigleveringsdienst
Overige details
Kleur:
oranje
Belangrijk
Deze aanbieding is enkel een richtlijn. Vraag de verkoper voor meer informatie.
Aankooptips
Contactgegevens van de verkoper
Yuri
Talen:
Oekraïens, Engels
+40 729 49...
Toon
+40 729 497 070
Adres
Duitsland, Saksen-Anhalt, 04109, Leipzig, Thomaskirchhof, 22
Lokale tijd verkoper:
13:24 (CET)
Contactgegevens van de verkoper
Aleanda
Duitsland
Sinds 3 jaar bij Machineryline
4.5
46 beoordelingen
+40 729 49...
Toon
+40 729 497 070
+380 67 005...
Toon
+380 67 005 0228
Verkoopt u machines of voertuigen?
U kunt het met ons doen!
Soortgelijke advertenties
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad
Weight kg 4500
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad