Nieuw A+B FASTECH MAX 40 pijpenbuiger

bending diam. - max. 36,0 mm ST
cutting thickness max. 36,0 mm ST
motor 1450 U/min
oil volume 32,0 l
motor 380 Volt 50 Hz
total power requirement 5,5 kW
weight 650 kg
range L-W-H 1470 x 1200 x 1020 mm
Furnishing :
- Maximum performance, minimum consumption
- hydraulic combined machine for bending and cutting operations
* for e.g. structural steel or solid material
- Bending mode with 3x different angle settings
- Manual and automatic mode selectable
- simultaneous bending and cutting operations When the machine is running, -
- "ECO mode" = hydraulic pump only runs when the foot switch is actuated
- free-moving footswitch
- Operation manual

Technical specifications :
- Steel 45 kg / mm² .. Bend Ø 36.0 mm / cutting Ø 36.0 mm
* for 2x pieces - steel 45 kg / mm² .. bend Ø 20.0 mm / cutting Ø 24.0 mm
- Steel 65 kg / mm² .. bend Ø 32.0 mm / cutting Ø 32.0 mm
* for 2x pieces - steel 65 kg / mm² .. bend Ø 18.0 mm / cutting Ø 20.0 mm
- Steel 85 kg / mm² .. Bend Ø 26.0 mm / cutting Ø 28.0 mm
* for 2x pieces - steel 85 kg / mm² .. bend Ø 14.0 mm / cutting Ø 18.0 mm
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.